Savikumaja´s Lime plasters are 100% natural and produced using solar energy. The lime plasters have been tested in Germany in accordance with the standard EN 998-1.
Inspired by traditional recipes, we have created contemporary products used for restoring historical buildings and finishing modern buildings. Saviukumaja’s Lime plaster is a durable material suitable for both indoor and outdoor conditions. Lime plaster as an interior decoration material is a great choice for creating a good indoor climate and increasing the fire resistance of constructions.
Saviukumaja's Lime plaster base coat 0-4 is prepared according to the traditional recipe. It is a dry mixture, that comprises high-grade hydrated lime CL90, crushed limestone sand and carefully selected 0-4 mm sand using a special grading curve.
Suitable for plastering various surfaces both outdoors and indoors, including in moist rooms. Used for plastering in the ground coat, and when necessary, for finishing, repair works of lime plaster, and laying building blocks. Suitable base surfaces: wood, stone, bricks, clay, lime and other mineral plasters, reed board, straw walls, concrete blocks, Aeroc, Fibo, etc.
Lime plaster adjusts the air humidity inside the room, inhibits the formation of mould, is suitable for people suffering from allergies, is free from harmful contaminants, and has antistatic properties. Saviukumaja’s Lime plaster base coat is a moisturepermeable material with great surface resistance, plasticity and adhesiveness; it is resistant to slight movements in walls (sinking).
The base surface must be stable, weight-bearing, dry, absorbent, adhesive, and definitely clean from dust, paints, and lubricants (oil, grease, etc.). We recommend using a Saviukumaja´s Thin reed mat when plastering wooden surfaces (logs, boarding, chipboards and other wood-based boards with a smooth surface); for insulation, use a Saviukumaja´s Reed board, natural fibreboard or corkboard. Use a fully covering Jute fabric from Saviukumaja’s selection to reinforce plaster in the second layer or a plastic net with a minimal loop size of 7 × 7 mm (in the case of facades), the overlay should be 7–10 cm.
We recommend using Saviukumaja's Finish lime plaster and Fine finish lime plasters for finishing. If you wish to display the base coat, we recommend applying Saviukumaja’s Primer on the surface.
Lime plaster, base coat (0-4 mm)
||COVERAGE 10 MM THICKNESS
||COVERAGE 15 MM THICKNESS